Optical Port Single Phase Electric Meter Active Energy Measurement
Model DDS155 single phase energy meter is a kind of new style
single phase two wire active energy meter, it adopt
micro-electronics technique, and imported large scale integrate
circuit, using advanced technique of digital and SMT techniques,
The meter meets relevant technical requirements of class 1 single
phase active energy meter stipulated in international standard IEC
62053-21.It can accurately and directly measure 50Hz or 60Hz active
energy consumption from single phase AC electricity net, it is used
indoor or outdoor, and display total energy consumption by step and
motor type impulse register.
With following features such as: good reliability, small volume,
light weight, specious nice appearance, convenient installation,
and etc, the meter is widely used in any occasions.
Functions and Features:
＊ Front board three fixed holes installation, the cover is made of
high definition transparent glass material molded overall, the base
of the meter is made of steel and anti-rust, meter and terminal
block is made of quality bakelite material which is
moisture-resistant, fire-retardant, high temperature molded
overall. It has following features: good weatherability, high
rigid, specious appearance and etc;
＊ 6+2 digits display (999999.99 kWh) by LCD with backlight;
＊ Standard configuration one port of pulse output passive
(polarity). Distant impulse output passive (no polarity) is also
acceptable. It can contact with all kind of AMR system
conveniently, complying with standard IEC 61036-2000;
＊ One LED indicator of power impulse(red). Can add LED indicators
for power state (green) and automatic detection the direct of the
trend of load current(when display yellow, which means the current
is reverse), please specified when ordering;
＊ Single direction single components measure single phase two wire
active power consumption. It is nothing with direction of the trend
of load current. Complying with standard IEC 62053-21;
＊ Directly connection in 2 types: type 1B and type 1A connection;
＊ Extended terminal cover, in order to protect to use electricity
|Model||Accuracy||Rated Voltage (V)||Rated Current (A)|
|DDS155||2.0, 1.0, 0.5S||220V/230V||1.5(6)A, 5(40)A, 10(60)A, 20(80)A|
＊ Use only isolated tools.
＊ Do not connect the meter to a 3 phase - 415V AC - network.
＊ Place the meter only in dry surroundings.
＊ Make sure the used wires are suitable for the max current the
meter can measure.
＊ Make sure the AC wires are installed correctly before activating
Why Choose Us
＊ Professional manufacturer for more than 15 years.
＊ Highly experienced production team in RADARKING factory
＊ QC Systerm: Quality controlled on all production lines, and QC
inspectors work independently from the production line.
＊ Good quality production with quick delivery.