Metal Case Single Phase Electric Meter KWH Measurings Power Meter
Long Terminal Cover
＊ Front board three fixed holes installation, the cover is made of
high definition transparent glass material molded overall, the base
of the meter is made of steel and anti-rust, meter and terminal
block is made of quality bakelite material which is
moisture-resistant, fire-retardant, high temperature molded
overall. It has following features: good weatherability, high
rigid, specious appearance and etc;
＊ 5+1 digits display (99999.9 kWh) by step motor and pulse
＊ Standard configuration one port of pulse output passive
(polarity). Distant impulse output passive (no polarity) is also
acceptable. It can contact with all kind of AMR system
conveniently, complying with standard IEC 61036-2000;
＊ One LED indicator of power impulse(red). Can add LED indicators
for power state (green) and automatic detection the direct of the
trend of load current(when display yellow, which means the current
is reverse), please specified when ordering;
＊ Single direction single components measure single phase two wire
active power consumption. It is nothing with direction of the trend
of load current. Complying with standard IEC 62053-21;
＊ Directly connection in 2 types: type 1B and type 1A connection;
＊ Extended terminal cover, in order to protect to use electricity
|Model||Accuracy||Rated Voltage (V)||Rated Current (A)||Starting Current (A)||Insulation Performance|
|AC voltage 4kV for 1 minute, 1.2/50us wave from impulse voltage
Model DDS155 single phase electric abstraction of electricity
prevention watt-hour meter is a kind of new style single phase two
wire active energy meter, it adopt micro-electronics technique, and
imported large scale integrate circuit, using advanced technique of
digital and SMT techniques, etc.
The meter meets relevant technical requirements of class 1 single
phase active energy meter stipulated in international standard IEC
62053-21.It can accurately and directly measure 50Hz or 60Hz active
energy consumption from single phase AC electricity net, it is used
indoor or outdoor, and display total energy consumption by step and
motor type impulse register.
With following features such as: good reliability, small volume,
light weight, specious nice appearance, convenient installation,
and etc, the meter is widely used in any occasions.
＊ Do not touch the meter connecting clamps directly with your bare
hands, with metal, blank wire or other material as you will have
the chance of an electricity shock and a possible chance for health
＊ Make sure the protection cover is placed after installation and
has been sealed.
＊ Installation, maintenance and repair should only be done by a
＊ Never break the seals or open the front cover as this might
influence the functionality of the meter.
＊ Do not through, drop, kick or other physical violence to the
meter as there are high precision components inside that will break
or make the meter measure inaccurate.
＊ Do not mount the meter in area's with harm gas, dust, mildew or
insects or on unstable surfaces.
Why Choose Us
1. Professional manufacturer for more than 15 years.
2. Highly experienced production team in RADARKING factory
3. QC Systerm: Quality controlled on all production lines, and QC
inspectors work independently from the production line.
4. Good quality production with quick delivery.
5. Accepted OEM/ODM.
6. Accepted small MOQ.
7. Factory certification: ISO9001, 14000, STS